{"title":"Flatlander Offroad","description":"","products":[{"product_id":"2025-front-only-door-strut-kit-for-4-door-polaris-ranger-1000-and-xp1000","title":"2025 FRONT ONLY door strut kit for 4-Door Polaris Ranger 1000 and XP1000","description":"\u003cp\u003e\u003cstrong\u003e*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** A 23\/64\" drill bit is required to install the rivet nuts***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility - \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- 2025 FRONT DOORS ONLY for 4-door\u003cspan\u003e Polaris Ranger 1000 and XP1000 including Northstar \u003cmeta charset=\"utf-8\"\u003emodels.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eGet rid of those rubber door straps! Once you have door struts on your Ranger you will wonder how you have lived without them all this time.\u003cspan\u003e \u003c\/span\u003eYou can relax knowing that those very expensive, heavy doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. \u003cspan\u003eIt pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Ranger is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to hold the door open to keep it from hitting your legs when getting in or out of your Ranger or worry about which direction to face your Ranger when opening the doors on a windy day. Set it where you need to keep the door within reach of the kids. With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets now have three holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBrackets are powder coated steel to match the frame of the Ranger. The struts are heavy duty with steel coupler ends to connect to the ball stud. The mounting bolts are black coated stainless steel. The kit blends in as if your Ranger came with it from the factory. All four door brackets\u003cspan\u003e have three positions to mount the ball stud. \u003c\/span\u003e\u003cspan\u003eThis allows you to choose how far the door opens from wide open to narrow for tight spaces. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets mount using existing body clip holes in the upper door. The original holes are enlarged slightly to allow for the installation of a threaded rivet nut and spacer.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003e\u003cspan\u003eUS Patent # 12,090,822\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003eMade in USA.\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Flatlander Offroad","offers":[{"title":"Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027183350004,"sku":"sku-54526064132387","price":200.0,"currency_code":"USD","in_stock":true},{"title":"Strut Kit with Rivet Nut Tool","offer_id":48027183382772,"sku":"sku-54526064165155","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/1868\/1076\/files\/2025_-_4-Door_FRONT_ONLY_door_Kit_Main_Final.jpg?v=1776811519"},{"product_id":"2026-current-2-door-strut-kit-for-polaris-ranger-1000-xp1000-and-kinetic","title":"2026 - Current 2-Door Strut Kit for Polaris Ranger 1000, XP1000 and Kinetic","description":"\u003cp\u003e\u003cstrong\u003e*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** A 23\/64\" drill bit is required to install the rivet nuts***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility - \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- All 2026 and up 2-door \u003cspan\u003e1000, XP1000 and Kinetic Polaris Rangers including Northstar models. \u003cstrong\u003e(\u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003eNot compatible with the front of crew models) \u003c\/strong\u003e\u003c\/em\u003eThere is separate kit listed for the front doors of 2019-2026 crew models.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eGet rid of those rubber door straps! Once you have door struts on your Ranger you will wonder how you have lived without them all this time.\u003cspan\u003e \u003c\/span\u003eYou can relax knowing that those very expensive, heavy doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. \u003cspan\u003eIt pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Ranger is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to hold the door open to keep it from hitting your legs when getting in or out of your Ranger or worry about which direction to face your Ranger when opening the doors on a windy day. Set it where you need to keep the door within reach of the kids. With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets now have three holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBrackets are powder coated steel to match the frame of the Ranger. The struts are heavy duty with steel coupler ends to connect to the ball stud. The mounting bolts are black coated stainless steel. The kit blends in as if your Ranger came with it from the factory. All four door brackets\u003cspan\u003e have three positions to mount the ball stud. \u003c\/span\u003e\u003cspan\u003eThis allows you to choose how far the door opens from wide open to narrow for tight spaces. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets mount using existing body clip holes in the upper door. The original holes are enlarged slightly to allow for the installation of a threaded rivet nut and spacer.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003e\u003cspan\u003eUS Patent # 12,090,822\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003eMade in USA.\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Flatlander Offroad","offers":[{"title":"Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027183448308,"sku":"sku-54525177561379","price":200.0,"currency_code":"USD","in_stock":true},{"title":"Strut Kit with Rivet Nut Tool","offer_id":48027183481076,"sku":"sku-54525177594147","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/1868\/1076\/files\/2026_-_2-Door_Kit_Main_Final.webp?v=1776873689"},{"product_id":"2-door-strut-kit-for-2018-2024-polaris-ranger-1000-xp1000-and-kinetic-2019-current-4-door-front-only","title":"2-Door Strut Kit for 2018-2024 Polaris Ranger 1000, XP1000 and Kinetic - 2019-Current 4-door (front only)","description":"\u003cp\u003e\u003cstrong\u003e*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** A 23\/64\" drill bit is required to install the rivet nuts***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility - \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- All 2018-2024 2-door \u003cspan\u003e1000, XP1000 and Kinetic Polaris Rangers including Northstar models. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e- FRONT doors only of the 2019-Current 4-door 1000 and XP1000 Polaris Rangers. \u003c\/p\u003e\n\u003cp\u003eGet rid of those rubber door straps! Once you have door struts on your Ranger you will wonder how you have lived without them all this time.\u003cspan\u003e \u003c\/span\u003eYou can relax knowing that those very expensive, heavy doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. \u003cspan\u003eIt pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Ranger is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to hold the door open to keep it from hitting your legs when getting in or out of your Ranger \u003cspan\u003eor worry about which direction to face your Ranger when opening the doors on a windy day.\u003c\/span\u003e \u003cspan\u003eSet it where you need to keep the door within reach of the kids.\u003c\/span\u003e With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets now have three holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrackets are powder coated steel to match the frame of the Ranger. The struts are heavy duty with steel coupler ends to connect to the ball stud. The mounting bolts are black coated stainless steel. The kit blends in as if your Ranger came with it from the factory. All four door brackets\u003cspan\u003e have three positions to mount the ball stud. \u003c\/span\u003e\u003cspan\u003eThis allows you to choose how far the door opens from wide open to narrow for tight spaces. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets mount using existing body clip holes in the upper door. The original holes are enlarged slightly to allow for the installation of a threaded rivet nut and spacer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003e\u003cspan\u003eUS Patent # 12,090,822\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003eMade in USA.\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Flatlander Offroad","offers":[{"title":"Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027183546612,"sku":"sku-53431934484771","price":200.0,"currency_code":"USD","in_stock":true},{"title":"Strut Kit with Rivet Nut Tool","offer_id":48027183579380,"sku":"sku-53431934517539","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/1868\/1076\/files\/2018_-_2024_-_2-Door_Kit_Main_Final.jpg?v=1776811523"},{"product_id":"4-door-strut-kit-for-2019-2024-xp1000-crew-and-all-1000-crew-polaris-rangers","title":"4-door Strut Kit for 2019-2024 XP1000 Crew and all 1000 Crew Polaris Rangers","description":"\u003cp\u003e\u003cstrong\u003e*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** A 23\/64\" drill bit is required to install the rivet nuts***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility - \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- All 2019-2024 4-door \u003cspan\u003e1000 and XP1000 Polaris Rangers including Northstar \u003cmeta charset=\"utf-8\"\u003emodels.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eGet rid of those rubber door straps! Once you have door struts on your Ranger you will wonder how you have lived without them all this time.\u003cspan\u003e \u003c\/span\u003eYou can relax knowing that those very expensive, heavy doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. \u003cspan\u003eIt pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Ranger is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to hold the door open to keep it from hitting your legs when getting in or out of your Ranger or worry about which direction to face your Ranger when opening the doors on a windy day. Set it where you need to keep the door within reach of the kids. With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets now have three holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBrackets are powder coated steel to match the frame of the Ranger. The struts are heavy duty with steel coupler ends to connect to the ball stud. The mounting bolts are black coated stainless steel. The kit blends in as if your Ranger came with it from the factory. All four door brackets\u003cspan\u003e have three positions to mount the ball stud. \u003c\/span\u003e\u003cspan\u003eThis allows you to choose how far the door opens from wide open to narrow for tight spaces. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets mount using existing body clip holes in the upper door. The original holes are enlarged slightly to allow for the installation of a threaded rivet nut and spacer.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003e\u003cspan\u003eUS Patent # 12,090,822\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003eMade in USA.\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Flatlander Offroad","offers":[{"title":"Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027183612148,"sku":"sku-53431593107747","price":400.0,"currency_code":"USD","in_stock":true},{"title":"Strut Kit with Rivet Nut Tool","offer_id":48027183644916,"sku":"sku-53431593140515","price":430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/1868\/1076\/files\/B-pillarbracketFinal_d7be232e-9866-4ada-ae71-5a18e7a10eee.webp?v=1776873285"},{"product_id":"2025-2-door-strut-kit-for-polaris-ranger-1000-xp1000-and-kinetic-watch-compatibility-video-at-link-below-before-ordering","title":"2025 2-Door Strut Kit for Polaris Ranger 1000, XP1000 and Kinetic **Watch compatibility video at link below before ordering**","description":"\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e-Please watch this video before ordering to determine the correct kit for your Ranger - \u003ca href=\"https:\/\/youtu.be\/8wkHa3pncdQ?si=np7UK840GafYGlDD\" title=\"Compatibility Video\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/youtu.be\/8wkHa3pncdQ?si=np7UK840GafYGlDD\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** A 23\/64\" drill bit is required to install the rivet nuts***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility -\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e-Please watch this video before ordering to determine the correct kit for your Ranger - \u003ca href=\"https:\/\/youtu.be\/8wkHa3pncdQ?si=np7UK840GafYGlDD\" target=\"_blank\" title=\"Compatibility Video\" rel=\"noopener\"\u003ehttps:\/\/youtu.be\/8wkHa3pncdQ?si=np7UK840GafYGlDD\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- 2025 2-door\u003cspan\u003e Polaris Ranger 1000 and XP1000 including Northstar \u003cmeta charset=\"utf-8\"\u003emodels. \u003cstrong\u003e(\u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003eNot compatible with the front doors of a 4-door Ranger). \u003c\/strong\u003e\u003c\/em\u003eThere is separate kit listed for the front doors of 2019-2026 crew models.\u003cstrong\u003e\u003c\/strong\u003e\u003cem\u003e\u003cstrong\u003e \u003c\/strong\u003e\u003c\/em\u003eSee video in photos to determine if you have a J-channel or Boxed crossmember to choose the correct kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eGet rid of those rubber door straps! Once you have door struts on your Ranger you will wonder how you have lived without them all this time.\u003cspan\u003e \u003c\/span\u003eYou can relax knowing that those very expensive, heavy doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. \u003cspan\u003eIt pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Ranger is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to hold the door open to keep it from hitting your legs when getting in or out of your Ranger or worry about which direction to face your Ranger when opening the doors on a windy day. Set it where you need to keep the door within reach of the kids. With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets now have three holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBrackets are powder coated steel to match the frame of the Ranger. The struts are heavy duty with steel coupler ends to connect to the ball stud. The mounting bolts are black coated stainless steel. The kit blends in as if your Ranger came with it from the factory. All four door brackets\u003cspan\u003e have three positions to mount the ball stud. \u003c\/span\u003e\u003cspan\u003eThis allows you to choose how far the door opens from wide open to narrow for tight spaces. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets mount using existing body clip holes in the upper door. The original holes are enlarged slightly to allow for the installation of a threaded rivet nut and spacer.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003e\u003cspan\u003eUS Patent # 12,090,822\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003eMade in USA.\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Flatlander Offroad","offers":[{"title":"J-Channel Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027183677684,"sku":"sku-54525984997667","price":200.0,"currency_code":"USD","in_stock":true},{"title":"J-Channel Strut Kit with Rivet Nut Tool","offer_id":48027183710452,"sku":"sku-54525985030435","price":230.0,"currency_code":"USD","in_stock":true},{"title":"Boxed Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027183743220,"sku":"sku-54525985063203","price":200.0,"currency_code":"USD","in_stock":true},{"title":"Boxed Strut Kit with Rivet Nut Tool","offer_id":48027183775988,"sku":"sku-54525985095971","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/1868\/1076\/files\/FrontdoorbracketFinal_75fc8282-3d71-4a58-be5b-2bb9467a96ef.jpg?v=1776811528"},{"product_id":"2022-5-to-2026-can-am-defender-2-door-strut-kit","title":"2022.5 to 2026 Can-Am Defender 2-Door Strut Kit","description":"\u003cp\u003e\u003cstrong\u003e*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** A 23\/64\" drill bit is required to install the rivet nuts***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit includes strut systems for both driver and passenger sides and is compatible with 2022.5-2026 doors. It is compatible with the 2-door and the front of the Max (4-door) XT and Lone Star models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***Not compatible with REAR doors on Max Limited HD11 models due to the speakers mounted behind the riders' heads***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnce you have door struts on your Defender you will wonder how you have lived without them all this time.\u003cspan\u003e \u003c\/span\u003eYou can relax knowing that those very expensive doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. \u003cspan\u003eIt pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Defender is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to worry about which direction to face your Defender when opening the doors on a windy day. Set it where you need to keep the door within reach of the kids. With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets have four holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces. In some cases the door limiting cable will have to be removed to use the widest door settings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSteel brackets are powder coated to match the Defender. The struts are heavy duty with steel coupler ends to connect to the ball studs. The mounting bolts are black coated stainless steel. The kit blends in as if it came with your Defender from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDoor brackets mount using existing holes and bolts in the upper door.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe pillar bracket mounts using one existing rivet nut in the roll cage pillar and requires one hole to be drilled to install an additional rivet nut. The rivet nut tool is available at the link below if needed. The rivet nut is the same one used to install other accessories including some from Trail Icon.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003e\u003cspan\u003eUS Patent # 12,090,822\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003eMade in USA.\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Flatlander Offroad","offers":[{"title":"Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027183808756,"sku":"sku-53431746461987","price":200.0,"currency_code":"USD","in_stock":true},{"title":"Strut Kit with Rivet Nut Tool","offer_id":48027183841524,"sku":"sku-53431746494755","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/1868\/1076\/files\/CanAmproductphoto5.webp?v=1776873089"},{"product_id":"2026-current-front-only-door-strut-kit-for-4-door-polaris-ranger-1000-and-xp1000","title":"2026 - Current FRONT ONLY door strut kit for 4-Door Polaris Ranger 1000 and XP1000","description":"\u003cp\u003e\u003cstrong\u003e*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** A 23\/64\" drill bit is required to install the rivet nuts***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility - \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- All 2026 and up FRONT DOORS ONLY on 4-door \u003cspan\u003e1000 and XP1000 Polaris Rangers including Northstar \u003cmeta charset=\"utf-8\"\u003emodels.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eGet rid of those rubber door straps! Once you have door struts on your Ranger you will wonder how you have lived without them all this time.\u003cspan\u003e \u003c\/span\u003eYou can relax knowing that those very expensive, heavy doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. \u003cspan\u003eIt pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Ranger is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to hold the door open to keep it from hitting your legs when getting in or out of your Ranger or worry about which direction to face your Ranger when opening the doors on a windy day. Set it where you need to keep the door within reach of the kids. With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets now have three holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBrackets are powder coated steel to match the frame of the Ranger. The struts are heavy duty with steel coupler ends to connect to the ball stud. The mounting bolts are black coated stainless steel. The kit blends in as if your Ranger came with it from the factory. All four door brackets\u003cspan\u003e have three positions to mount the ball stud. \u003c\/span\u003e\u003cspan\u003eThis allows you to choose how far the door opens from wide open to narrow for tight spaces. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets mount using existing body clip holes in the upper door. The original holes are enlarged slightly to allow for the installation of a threaded rivet nut and spacer.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003e\u003cspan\u003eUS Patent # 12,090,822\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003eMade in USA.\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Flatlander Offroad","offers":[{"title":"Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027183874292,"sku":"sku-54525752672547","price":200.0,"currency_code":"USD","in_stock":true},{"title":"Strut Kit with Rivet Nut Tool","offer_id":48027183907060,"sku":"sku-54525752705315","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/1868\/1076\/files\/2026_-_Current_-_4-Door_FRONT_door_Kit_Main_Final.webp?v=1776872652"},{"product_id":"2025-4-door-strut-kit-for-1000-and-xp1000-polaris-ranger-crew-watch-compatibility-video-at-link-below-before-ordering","title":"2025 4-door Strut Kit for 1000 and XP1000 Polaris Ranger Crew **Watch compatibility video at link below before ordering**","description":"\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e-Please watch this video before ordering to determine the correct kit for your Ranger - \u003ca href=\"https:\/\/youtu.be\/8wkHa3pncdQ?si=np7UK840GafYGlDD\" title=\"Compatibility Video\" rel=\"noopener\" target=\"_blank\"\u003ehttps:\/\/youtu.be\/8wkHa3pncdQ?si=np7UK840GafYGlDD\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** A 23\/64\" drill bit is required to install the rivet nuts***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility -\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cmeta charset=\"utf-8\"\u003e-Please watch this video before ordering to determine the correct kit for your Ranger - \u003ca href=\"https:\/\/youtu.be\/8wkHa3pncdQ?si=np7UK840GafYGlDD\" title=\"Compatibility Video\"\u003ehttps:\/\/youtu.be\/8wkHa3pncdQ?si=np7UK840GafYGlDD\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- 2025 4-door\u003cspan\u003e Polaris Ranger 1000 and XP1000 including Northstar \u003cmeta charset=\"utf-8\"\u003emodels. See video in photos to determine if you have a J-channel or Boxed crossmember to choose the correct kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eGet rid of those rubber door straps! Once you have door struts on your Ranger you will wonder how you have lived without them all this time.\u003cspan\u003e \u003c\/span\u003eYou can relax knowing that those very expensive, heavy doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. \u003cspan\u003eIt pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Ranger is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to hold the door open to keep it from hitting your legs when getting in or out of your Ranger or worry about which direction to face your Ranger when opening the doors on a windy day. Set it where you need to keep the door within reach of the kids. With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets now have three holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBrackets are powder coated steel to match the frame of the Ranger. The struts are heavy duty with steel coupler ends to connect to the ball stud. The mounting bolts are black coated stainless steel. The kit blends in as if your Ranger came with it from the factory. All four door brackets\u003cspan\u003e have three positions to mount the ball stud. \u003c\/span\u003e\u003cspan\u003eThis allows you to choose how far the door opens from wide open to narrow for tight spaces. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets mount using existing body clip holes in the upper door. The original holes are enlarged slightly to allow for the installation of a threaded rivet nut and spacer.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003e\u003cspan\u003eUS Patent # 12,090,822\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003eMade in USA.\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Flatlander Offroad","offers":[{"title":"J-Channel Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027184431348,"sku":"sku-54525995548963","price":400.0,"currency_code":"USD","in_stock":true},{"title":"J-Channel Strut Kit with Rivet Nut Tool","offer_id":48027184464116,"sku":"sku-54525995614499","price":430.0,"currency_code":"USD","in_stock":true},{"title":"Boxed Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027184496884,"sku":"sku-54525995581731","price":400.0,"currency_code":"USD","in_stock":true},{"title":"Boxed Strut Kit with Rivet Nut Tool","offer_id":48027184529652,"sku":"sku-54525995647267","price":430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/1868\/1076\/files\/FrontdoorbracketFinal_2bf32b72-70c5-4674-aae5-07e7fcce72ee.webp?v=1776871093"},{"product_id":"2026-current-4-door-strut-kit-for-polaris-ranger-1000-and-xp1000","title":"2026 - Current 4-Door Strut Kit for Polaris Ranger 1000 and XP1000","description":"\u003cp\u003e\u003cstrong\u003e*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** A 23\/64\" drill bit is required to install the rivet nuts***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility - \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- All 2026 and up 4-door \u003cspan\u003e1000 and XP1000 Polaris Rangers including Northstar \u003cmeta charset=\"utf-8\"\u003emodels.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eGet rid of those rubber door straps! Once you have door struts on your Ranger you will wonder how you have lived without them all this time.\u003cspan\u003e \u003c\/span\u003eYou can relax knowing that those very expensive, heavy doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. \u003cspan\u003eIt pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Ranger is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to hold the door open to keep it from hitting your legs when getting in or out of your Ranger or worry about which direction to face your Ranger when opening the doors on a windy day. Set it where you need to keep the door within reach of the kids. With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets now have three holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBrackets are powder coated steel to match the frame of the Ranger. The struts are heavy duty with steel coupler ends to connect to the ball stud. The mounting bolts are black coated stainless steel. The kit blends in as if your Ranger came with it from the factory. All four door brackets\u003cspan\u003e have three positions to mount the ball stud. \u003c\/span\u003e\u003cspan\u003eThis allows you to choose how far the door opens from wide open to narrow for tight spaces. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets mount using existing body clip holes in the upper door. The original holes are enlarged slightly to allow for the installation of a threaded rivet nut and spacer.\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003e\u003cspan\u003eUS Patent # 12,090,822\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003eMade in USA.\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Flatlander Offroad","offers":[{"title":"Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027184562420,"sku":"sku-54525188440355","price":400.0,"currency_code":"USD","in_stock":true},{"title":"Strut Kit with Rivet Nut Tool","offer_id":48027184595188,"sku":"sku-54525188473123","price":430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/1868\/1076\/files\/2026_-_4-Door_Kit_Main_Final.webp?v=1776835531"},{"product_id":"2022-5-to-2026-can-am-defender-max-4-door-strut-kit","title":"2022.5 to 2026 Can-Am Defender Max 4-Door Strut Kit","description":"\u003cp\u003e\u003cstrong\u003e*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** A 23\/64\" drill bit is required to install the rivet nuts***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit is compatible with 2022.5-2026 HD10 and HD11 XT and Lone Star Max doors and includes strut systems for all four doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***Not compatible with REAR doors on Max Limited HD11 models due to the speakers mounted behind the riders' heads***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnce you have door struts on your Defender you will wonder how you have lived without them all this time.\u003cspan\u003e \u003c\/span\u003eYou can relax knowing that those very expensive doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. \u003cspan\u003eIt pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Defender is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to worry about which direction to face your Defender when opening the doors on a windy day. Set it where you need to keep the door within reach of the kids. With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets have four holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces. In some cases, the door limiting cable will have to be removed to use the widest door settings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSteel brackets are powder coated to match the Defender. The struts are heavy duty with steel coupler ends to connect to the ball studs. The mounting bolts are black coated stainless steel. The kit blends in as if it came with your Defender from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDoor brackets mount using existing holes and bolts in the upper door.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe pillar bracket mounts using one existing rivet nut in the roll cage pillar and requires one hole to be drilled to install an additional rivet nut. The rivet nut tool is available at the link below if needed. The rivet nut is the same one used to install other accessories including some from Trail Icon.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003e\u003cspan\u003eUS Patent # 12,090,822\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003eMade in USA.\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Flatlander Offroad","offers":[{"title":"Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48027184627956,"sku":"sku-53431710089507","price":400.0,"currency_code":"USD","in_stock":true},{"title":"Strut Kit with Rivet Nut Tool","offer_id":48027184660724,"sku":"sku-53431710122275","price":430.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/1868\/1076\/files\/CanAmproductphoto4.jpg?v=1777308570"},{"product_id":"2022-5-to-2026-can-am-defender-2-door-strut-kit-1","title":"2022.5 to 2026 Can-Am Defender 2-Door Strut Kit","description":"\u003cp\u003e\u003cstrong\u003e*** Rivet nut tool with M6 mandrel required - this can be ordered with the kit if you do not have one ***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e*** A 23\/64\" drill bit is required to install the rivet nuts***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit includes strut systems for both driver and passenger sides and is compatible with 2022.5-2026 doors. It is compatible with the 2-door and the front of the Max (4-door) XT and Lone Star models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e***Not compatible with REAR doors on Max Limited HD11 models due to the speakers mounted behind the riders' heads***\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOnce you have door struts on your Defender you will wonder how you have lived without them all this time.\u003cspan\u003e \u003c\/span\u003eYou can relax knowing that those very expensive doors won't get pulled out of your hands by the wind or hit your legs as you are getting in. \u003cspan\u003eIt pushes and holds the door open for you when opening the door. It also slows the door opening if the wind catches the door or if your Defender is parked on an up slope. This makes it much less likely that the door will be pulled out of your hand. You no longer have to worry about which direction to face your Defender when opening the doors on a windy day. Set it where you need to keep the door within reach of the kids. With the door closed, the strut and brackets are well clear of your head and do not block your view out of the window.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll door brackets have four holes to mount the ball stud. This allows you to choose how far the door opens from wide open to narrow for tight spaces. In some cases the door limiting cable will have to be removed to use the widest door settings.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSteel brackets are powder coated to match the Defender. The struts are heavy duty with steel coupler ends to connect to the ball studs. The mounting bolts are black coated stainless steel. The kit blends in as if it came with your Defender from the factory.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDoor brackets mount using existing holes and bolts in the upper door.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe pillar bracket mounts using one existing rivet nut in the roll cage pillar and requires one hole to be drilled to install an additional rivet nut. The rivet nut tool is available at the link below if needed. The rivet nut is the same one used to install other accessories including some from Trail Icon.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003e\u003cspan\u003eUS Patent # 12,090,822\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"color: #2b00ff;\"\u003eMade in USA.\u003c\/strong\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*** International orders will not be charged duties or taxes at checkout. Any applicable duties or taxes will be collected by the appropriate agency in the receiving country. ***\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Flatlander Offroad","offers":[{"title":"Strut Kit Only - I have my own rivet nut tool with M6 mandrel","offer_id":48086091333876,"sku":"sku-53431746461987","price":200.0,"currency_code":"USD","in_stock":false},{"title":"Strut Kit with Rivet Nut Tool","offer_id":48086091366644,"sku":"sku-53431746494755","price":230.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0756\/1868\/1076\/files\/CanAmproductphoto3.jpg?v=1777309143"}],"url":"https:\/\/sxsparts.com\/collections\/flatlander-offroad.oembed","provider":"SXSParts.com","version":"1.0","type":"link"}